Blown film production boost with new die head from W&H

Comptoir National du Plastique (CNP) in Tunisia increases production of its blown film line by 20% with a retrofit from W&H

Сase studies

Improving tolerances by 30% and achieving faster startups with EDI® Automatic Die from Nordson

Nordson's Autoflex™ VI-RE die yields more uniform film, enhancing the printing and heat shrinking processes used for labels in packaging

New Issue

30.04.2025

Extrusion 3-2025

Rotary Lobe Pump From Netzsch

Source: smart_extrusion

Videos

Tags: #Materials handling, #Netzsch, #Feeding and dosing, #Storage and conveying

News

News 30.04.2025

New Macchi 9-layer high barrier line in China

A line has a 3,000 mm layflat and a capacity of up to 700 kg/h

News 30.04.2025

Agreement for pyrolysis oil from chemical recycling of plastic waste

RES will sell pyrolysis oil to Shell Chemicals Europe

Articles

Color measurement system for optimizing the plastics recycling

A research project to develop a camera-based measuring system for optimized colour formulation in plastics recycling was successfully completed at the SKZ Plastics Centre in Würzburg, Germany

Articles

Sustainable and closed loop solutions of flame retarded plastics

The hffr-Up2Cycle project, lead by the German Fraunhofer Institute LBF, aims to increase the sustainability of plastic materials formulated with flame retardeds

Case studies

Сase studies

A clear commitment to film production in Europe

Plastchim-T, a Bulgarian manufacturer of biaxially oriented polypropylene films, orders a new Brückner 8.7m wide 5-layer BOPP film line

Сase studies

Cost savings with ultrasonic measuring system from Zumbach

SWM International, based in Richland, Philadelphia, USA, achieved $40,000 cost savings in 1 Year using UMAC® ultrasonic measuring system from Zumbach Electronic

PVC extruder from battenfeld-cincinnati convinces Bahrain Pipes

The key feature of the combination of parallel twin-screw extruder twinEX and co-extruder conEX is the permanently installed gravimetric dosing unit on the twinEX

News 12.04.2025

CMG Granulators New G55 Line: High Capacity, Robustness, Precision

The new G55 Line is made of two models: G55-90 and G55-120

News 10.04.2025

Coperion at Chinaplas 2025

Technologies for Closing the Loop in Plastics Compounding and Recycling

News 07.04.2025

Color homogeneity of cables with half the masterbatch dosing rate

Delta Tecnic manages to reduce the amount of Masterbatch needed to 1% on average without compromising quality and allowing cost savings of up to 30%

News 27.02.2025

Lab Vee Cone Blender has intensifier bar, air brake

New Munson's one cubic foot (28 liter) capacity model VB-1-SSIS for laboratory and pilot applications has a swing radius of 21.5 in. (.55 m)