Blown film production boost with new die head from W&H

Comptoir National du Plastique (CNP) in Tunisia increases production of its blown film line by 20% with a retrofit from W&H

Сase studies

Improving tolerances by 30% and achieving faster startups with EDI® Automatic Die from Nordson

Nordson's Autoflex™ VI-RE die yields more uniform film, enhancing the printing and heat shrinking processes used for labels in packaging

New Issue

30.04.2025

Extrusion 3-2025

CamelBak + Eastman: Revolutionizing Materials

Source: smart_extrusion

Videos

Tags: #Materials handling

News

News 03.05.2025

perfecdos: Rethinking and Utilizing Natural Rubber

With perfecdos' contactless dosing system, natural rubber (NR) can be used even when the smallest volumes need to be dosed with process reliability

News 03.05.2025

Områ: Norway's new national plastic sorting facility

Områ is equipped with state-of-the-art TOMRA sorting technology and solutions at a scale not previously deployed in Norway

Articles

Color measurement system for optimizing the plastics recycling

A research project to develop a camera-based measuring system for optimized colour formulation in plastics recycling was successfully completed at the SKZ Plastics Centre in Würzburg, Germany

Articles

Sustainable and closed loop solutions of flame retarded plastics

The hffr-Up2Cycle project, lead by the German Fraunhofer Institute LBF, aims to increase the sustainability of plastic materials formulated with flame retardeds

Case studies

Сase studies

Mexico's converter chooses Vetaphone

One of Mexico’s leading narrow web converters of labels and shrink sleeves, Promographic & Design, has fitted Vetaphone corona technology to its Nilpeter flexo and HP Indigo digital presses

Сase studies

A clear commitment to film production in Europe

Plastchim-T, a Bulgarian manufacturer of biaxially oriented polypropylene films, orders a new Brückner 8.7m wide 5-layer BOPP film line

perfecdos: Rethinking and Utilizing Natural Rubber

With perfecdos' contactless dosing system, natural rubber (NR) can be used even when the smallest volumes need to be dosed with process reliability

Сase studies

PVC extruder from battenfeld-cincinnati convinces Bahrain Pipes

The key feature of the combination of parallel twin-screw extruder twinEX and co-extruder conEX is the permanently installed gravimetric dosing unit on the twinEX

News 12.04.2025

CMG Granulators New G55 Line: High Capacity, Robustness, Precision

The new G55 Line is made of two models: G55-90 and G55-120

News 10.04.2025

Coperion at Chinaplas 2025

Technologies for Closing the Loop in Plastics Compounding and Recycling

News 07.04.2025

Color homogeneity of cables with half the masterbatch dosing rate

Delta Tecnic manages to reduce the amount of Masterbatch needed to 1% on average without compromising quality and allowing cost savings of up to 30%