Blown film production boost with new die head from W&H

Comptoir National du Plastique (CNP) in Tunisia increases production of its blown film line by 20% with a retrofit from W&H

Сase studies

Improving tolerances by 30% and achieving faster startups with EDI® Automatic Die from Nordson

Nordson's Autoflex™ VI-RE die yields more uniform film, enhancing the printing and heat shrinking processes used for labels in packaging

New Issue

07.10.2025

Extrusion International USA 5-2025

Fully automatic three layer blown film line

Source: smart_extrusion

Videos

Model: SE3HR- 1450-45/55/45

Tags: #Processes, #Shubham Extrusion, #Blown film extrusion

News

News 20.11.2025

Executive Board Change at Hosokawa Alpine

Continuity and new beginnings at the top of the company – On 1 January 2026, Hosokawa Alpine will undergo a significant change in the company's management

News 12.11.2025

Innovative Ultrasonic Monitoring of Dosing

The company WOYWOD, with its PLASTICOLOR brand, offers precise real-time ultrasonic monitoring for granulate dosing – both for new systems and for retrofitting existing PLASTICOLOR mixing stations.

Articles

Intelligent Extrusion Systems (iES) Elevates PE-Xa Pipe Quality Production with Zumbach Electronic Integration

Articles

WURSI Relies on WEIMA W5.14 Shredders – Shredding as a Key Process

With two WEIMA single-shaft shredders as the central component of the recycling line, WURSI Group processes around 1,500 tons of polypropylene and polyethylene into regranulate every month

Case studies

Сase studies

How AB Plasta and Tomra are setting new recycling standards in the Baltics

AB Plasta has successfully implemented an advanced flexible film recycling line in collaboration with TOMRA Recycling

Сase studies

Stadler completes lightweight packaging sorting plant for PreZero in Austria

This advanced automated recycling facilitiy combines high-performance technology, cutting-edge AI integration and sustainable design

Innovative Ultrasonic Monitoring of Dosing

The company WOYWOD, with its PLASTICOLOR brand, offers precise real-time ultrasonic monitoring for granulate dosing – both for new systems and for retrofitting existing PLASTICOLOR mixing stations.

Articles

New Duration Cutting Blade for Strand Granulators

MAAG responds to the particular challenge posed by the strand pelletisation of fibre-reinforced plastics.

News 12.11.2025

80 Years of Pioneering Co-Kneader Technology Celebrated

In the Lifetime Lounge at the booth, BUSS showcased the history of the continuous development of its co-kneader technology.

Articles

More Efficiency in Compounding and Recycling

Coperion

At K 2025 Coperion exhibited a twin screw extruder with a 58 mm screw diameter, achieving throughputs of up to 2,500 kg/h with low energy consumption and a high degree of automation

News 03.11.2025

Direct Compounding Technology for Polycarbonate Production

EPC Engineering & Technologies GmbH from Arnstadt, in close cooperation with Coperion GmbH from Stuttgart, have developed a groundbreaking one-step process for the direct compounding of polycarbonate (PC) melt