Zumbach Online Banner 1146x100 Extrusion EN 2025

en English arrow
de Deutsch
ch 中國
Tags

Guill multiproducts smartextrusion 12 25

exelliq2026 03en

New Issue
Логотип сайта
SML: Cast MDO Competence

SML: Cast MDO Competence

News 20.11.2026
SML Bild 1

(Copyright: Karin Hackl)

 

 

 

SML's Technology Centre in Redlham is home to a new Cast MDO demonstration line – and it is a true all-rounder. Whether unstretched film or mono-oriented film is required, this single line covers a broader segment of the cast film market than almost any other.

"Conventional CPP structure, seven-layer barrier film or ultra-thin mono-oriented film – our Cast-MDO technology delivers them in best quality and with maximum efficiency. And we have the right line parameters for every single product," says Elias Mayrhofer, Product Manager at SML. New recipes and polymer combinations are equally welcome, with SML's process engineers on hand to support development.

SML Bild 2 Beutel Pouch

                                        (Copyright: MSFotogroup)

Product possibilities

CPP film from 15 to 250 µm and CPE film from 18 to 150 µm offer high transparency and low haze – for metallised and laminated food and non-food packaging, retort structures, as well as technical and medical films. Unstretched barrier films from 30 to 250 µm are built around EVOH or PA6 and protect against oxygen, water vapour, odour and UV light; the layer arrangement is freely configurable.

The real highlight is mono-oriented film. MDO-PE from 15 to 80 µm can replace BOPET, turning a PET/PO structure into a recyclable mono-material. With stiffness above 1,400 MPa in machine direction, haze below 5% and excellent flatness, it suits both surface and reverse printing as well as metallising. MDO barrier films from 17 to 40 µm reach oxygen transmission rates of 1 to 5 cm³/m² per day; MDO-PP from 15 to 80 µm offers straight tear behaviour for easy-tear pouch film, label film, carrier handles and tear tapes.

Adjustable stretching gap

The new Cast-MDO line enables stretching ratios of up to 1:10 and a stretching gap that can be adjusted to suit the product – based on an extended temperature profile controlled in fine steps: five preheating rollers, two stretching rollers, five annealing rollers and one cooling roller, each individually driven and temperature-controlled up to 160 °C.

Put your cast film idea to the test

The industrial-scale Cast-MDO line is at your disposal for trials, product development and sample production. Whether you are entering cast film production for the first time or redesigning an existing structure for recyclability – the Cast-MDO line at SML's Technology Centre has the equipment, the technology and the expertise to make it happen.

SML Maschinengesellschaft mbH · Gewerbepark Ost 32 · A-4846 Redlham · www.sml.at

Our website makes use of cookies to ensure we give you the best experience on our website.
By continuing browsing on our website you give your consent to our use of cookies.