VM
Tags

multi-productsbanner smartextrusion original

UNION 368x420 SmartExt lug

New Issue

Extrusion 4-2019

25.06.2019

Extrusion 4-2019

FISA170502 banner01new

Логотип сайта
SML DoubleCoat for breathable products

SML DoubleCoat for breathable products

News 28.05.2019
SML 16 203 Ausschnitt

With its patented DoubleCoat process, SML has revolutionised the way that ultra-thin functional clothing and membranes can be produced with highest mechanical properties. Before the DoubleCoat process was invented, the thinner the functional layer or membrane to be applied onto a substrate like spunbonds or textile fabrics, the greater the probability that a so-called double-stage process would be necessary to build up the complete product structure.

"Thanks to SML's DoubleCoat process, extremely thin composite structures can now be realised quite easily. This involves the extruded membrane joining the substrate in a single production step by adding an extra hotmelt layer," says Johannes Danter, product manager for coating and laminating at SML. In the new process, the desired functional properties – such as increased adhesion, water vapour permeability or virus and bacteria barriers – can be easily adjusted by the coating weight of either the applied membrane or the hotmelt layer.

Once a good balance is found between the substrate, adhesive and extruded membrane, the DoubleCoat process is ready for a wide range of applications with following product features:

  • Washable functional clothing such as breathable sportswear or protective clothing
  • Outdoor applications such as tents, rucksacks or light tarpaulins
  • Interior linings for automotive applications
  • Roofing membranes for the construction industry
  • Hygiene applications such as breathable layers in napkins/diapers
  • Medical applications such as protective clothing and surgical coverings

DoubleCoat technology can be easily integrated into SML's FlexPack extrusion coating lines, combining extrusion coating with hotmelt lamination. The huge cost advantage of the DoubleCoat process comes courtesy of a massive reduction in raw material use and the consolidation of typically multi-stage processes into a single step.

About the company

SML is a privately owned, high-tech manufacturer of top quality extrusion lines from Austria. Since 1995, SML is a 100 percent family owned company. The company has gathered a huge array of manufacturing and design expertise.

sm242x60

IPTF242x60

Extrusion-International 242x60

BatCinVMbanner2

Our website makes use of cookies to ensure we give you the best experience on our website.
By continuing browsing on our website you give your consent to our use of cookies.