UNION 368x420

New Issue

Extrusion 5-2017


Extrusion 5-2017

Fakuma Banner2017


Verstraete Banner SmartExtrusion 20170802

Extrusion Line for Multilayer Pipes Production

News 16.05.2016
amut foto 1

AMUT continues to improve the technology of lines producing PP pipes with glass fibres and mineral filler (calcium carbonate or barium sulphate). The pipes extruded with this technology are used for hot­water piping and soundproofing drainage piping. The glass fibres improve the elastic and mechanical properties of the material, the reduction in pipe thickness, maintaining the same resistance level, and the thermal expansion (less joints are required). The quality of pipes is definitely enhanced.

The line has a range of diameters from 16 to 200 mm, with SDR 6–11, and the new design 3-layer co-extrusion head allows a configuration A-B-A or A-B-C with external coloured stripes.

Main Technical Features:
The co-extrusion line configuration consists of four extruders:
•     EA60 Single Screw Extruder - (A) Internal/External Layer
•     EA75 Single Screw Extruder - (B) Middle Layer (Glass Fibres/Mineral Filler)
•     EA60 Single Screw Extruder - (C) External Layer
•     EA20 Single Screw Extruder - External Coloured Stripes

The extruders are fed by gravimetric system for a better control of the output and each screw and barrel undergo a special antiabrasion treatment to process properly the glass fibres or the mineral filler.

The production changeover, according to the chosen diameter, is very quick because the whole re-tooling concept is devised to minimize times and manual operator intervention.

The gauging measurement system continuously controls all the parameters during the production process to ensure a top quality pipes. The software manages the different recipes.


Our website makes use of cookies to ensure we give you the best experience on our website.
By continuing browsing on our website you give your consent to our use of cookies.